Well-flushing and Workover Rig

250P workover rig is a newly developed workover and well flushing equipment. The Workover Rig is fitted with 8×6 self-propelled chassis, engine and hydromechanical transmission. Power is transferred to front & rear axles, drawworks, transfer case and pump on deck. PTO of transmission is connected with a hydraulic pump which provides power for some hydraulic parts on deck. The Workover Rig is equipped with a hydraulic rotary table, a power skid with a NTA885-C280 Cumins engine will provide power for the rotary table through a hydraulic pump. The Workover Rig is also equipped with an air compressor and generator set providing power for lighting of engine, drawworks, mast and operating platform.

Features

Well-known diesel engine and transmission.
69 ft ( 21m ) double mast or 59 ft ( 18m ) single mast.
6×6 full drive chassis, fast movement and good cross-country capability.
Double drum drawworks,band brake, main drum with Lebus groove.
Mast seat and simple operation platform shipped together with rig.
Provide connecting port for rotary operation.

Parameters

Model	XJ250P
Service depth (2-1/2"TBG) ft(m)	11812(3600)
Workover Depth (2-7/8"DP) ft(m)	8530(2600)
Nominal hook load lb(kN)	112400(500)
Max hook load lb(kN)	168600(750)
Wireline dia/effective line quantity in.(mm)	φ0.87/6(φ22/6)
Max lifting speed ft/s(m/s)	4.92(1.5)
Overall dimensions in traveling condition ft(m)	45.28×9.81×12.80(13.8×2.99×3.9)
weight lb(kg)	83775.56(38000)

Well-flushing and Workover Rig

Well-flushing Workover Rig

Offers well servicing with a fleet of double drum work over rigs and swabbing units. Based in Canadian, Texas.

Supplier of machinery and materials including drilling and workover rigs and ancillary equipment and parts.

Operating 242 rigs, mainly in Canada. Most of these are workover rigs.

Well-flushing and Workover Unit